Water Treatment FeCl3 Ferric Chloride In Dye Industry Catalyst

Water Treatment FeCl3 Anhydrous Ferric Chloride 98% Purity CAS 7705-08-0

Introduction

The high-quality anhydrous ferric chloride produced by our company is mainly composed of catalytic sodium sulfite, and its content is as high as 90%. It has the characteristics of high efficiency and convenience. It can effectively remove the oxygen contained in the boiler water, thereby solving the corrosion of boilers, heat exchangers and other metal equipment. Circumstances, it has a good corrosion inhibition effect, and is often used in industries such as heating and hot water boilers for circulating oxygen removal. It has a good oxygen removal effect even under low temperature conditions. This product has low cost and convenient source of oxygen removal agent for hot water boilers. It is non-toxic and harmless, and reacts quickly with oxygen. Adding a small amount of copper, manganese, cobalt and other catalysts can speed up the reaction rate and achieve better results.
In the process of use, generally add 20~35ppm according to different water quality. The higher the temperature, the shorter the reaction time, and the better the effect.
This product is a strong reducing agent. It should be stored in a cool and dry place during storage. Avoid contact with water and oxidants to avoid qualitative changes. The high-quality anhydrous ferric chloride produced by our company is packaged in a plastic round and has a shelf life of one year.

Parameter

Application

Anhydrous Ferric Chloride especially for water-treatment in industries, corrosive for electronic printed board, chlorinating agent in metallurgical industry, oxidant and mordant in dye industry, and catalyst, oxidant, and chlorinating agent in organic synthesis, and also for making ferric salt, pigment as raw material.