|
Product Details:
|
| Product Name: | Polyacrylamide PAM | MF: | (C3H5NO)n |
|---|---|---|---|
| Types: | APAM, CPAM, NPAM | Appearance: | White Crystal Powder |
| Application: | Waste Water Treatment | Classification: | Chemical Auxiliary Agent |
| High Light: | PAM Chemical Auxiliary Agent,Polyacrylamide Chemical Auxiliary Agent |
||
PAM Water Treatment Chemical Flocculant Nonionic Anionic Cationic Polyacrylamide
| Specification | Anionic Polyacrylamide | Cationic Polyacrylamide | Nonionic Polyacrylamide |
| Appearance | off white granular powder | ||
| Molecular Weight | 5-22 million | 5-12 million | 5-12 million |
| Charge Density | 5%-50% | 5%-60% | 0%-5% |
| Solid Content | 89%Min | ||
| Recommended Working Concentration | 0.1%-0.5% | ||
1.Dissolution: Dissolve solid PAMto 1%—5% water solution before using. When dosage, it should be added into water slowly to ensure that the chemical can be dissolved
2.Solution dosage: Normallythe water solution is 1%—5%, but with high concentration and high viscosity suspension, it is advised to dilute water solution to 0.1% to get a better (Trying to avoid using high-shear centrifugal pumps to dissolve the solution to prevent the molecular chain from being cut)
3.Compared with anionic PAM, cationic onehas lower molecular weight, so does the Therefore, cationic and nonionic PAM have higher concentration ratio than anionic PAM. Recommended concentration is 1%—5%.
1.Mine Washing:
The product can be used in coal washing tailing centrifugal separation, can be used in sedimentation and filtration of coal powder and coal mud, and can improve the recovery rate of coal powder and the filtration speed.
2. Sewage Water Treatment:
When sewage water systems are acidophilic, it is more suitable to select nonionic-polyacrylamide, the product can be matched with flocculating agent PAC, aluminium sulphate and the like, and it has the best effect in water treatment.
3. Metallurgical Mineral Dressing:
It can be used in floatation and smelting of Zinc, manganese and copper mines, its leachate and slag can be added into PAM to improve the separation efficiency.
4. Sand Prevention and Solidification:
The nonionic-polyacrylamide is dissolved into 0.3% concentration, cross-linking agent is added, and the product can be sprayed on desert to prevent and solidify sand.
5. Oil field profile controlling and water-plugging agent:
The product can be matched with lignocellulose, a certain amount of chemical adhesive can be added, and the product can be used as oil field profile controlling and water-plugging agent.
6. Soil humectants:
It can preserve water and solidify sand for soil and can play a role of humectant on slope grass planting, tree planting, and sand solidification and dust prevention of soil.
Contact Person: Jessic
Tel: +86 13928889251
Fax: 86-020-22307821
